Skip to content

Instantly share code, notes, and snippets.

Discover gists

@jeffochoa
jeffochoa / Response.php
Last active May 21, 2024 05:09
Laravel HTTP status code
<?php
// This can be found in the Symfony\Component\HttpFoundation\Response class
const HTTP_CONTINUE = 100;
const HTTP_SWITCHING_PROTOCOLS = 101;
const HTTP_PROCESSING = 102; // RFC2518
const HTTP_OK = 200;
const HTTP_CREATED = 201;
const HTTP_ACCEPTED = 202;
@lcrilly
lcrilly / README.md
Last active May 21, 2024 05:08
Prometheus exporter for NGINX Unit metrics

Prometheus exporter for NGINX Unit metrics

The NGINX Unit control API includes a /status endpoint for usage statistics. This is a solution for exposing these metrics in Prometheus format.

The application (run by Unit) queries the /status URI on the control socket and converts the JSON response into Prometheus text format. PHP and Python implementations are available.

These instructions assume an existing Unit installation with a working configuration. We will add a new listener on the default prometheus port (9090) and route it directly to the Prometheus app.

Step 0. Install the preferred Unit language module (unit-php or unit-python)

@tazihad
tazihad / Software version with Serial key
Last active May 21, 2024 05:05
1. Photoscissors 6.1 : UAAA-UAYO-AKBA-LAAA-WULP-MAKA-IFHA-CLAF
2. Batch Inpaint 2.2: ZUKA-BACE-GTRD-UCNR-LYDK-TVZG-ORNZ-HUTY
3. DupHunter 2.0: QRRD-ODNY-DJEI-CABC-AIVN-EPTP-DGAT-JSWB
4. FolderIco 6.2.x: FKAA-HAWO-MBRY-FHEV-UKAJ-DYHV-XWWA-PAFP
5. Inpaint 8.0: HWTU-QACW-ELMN-SVGP-AAAI-ITGP-EYPH-CFAP
6. Intelligent Resizer 3.0: EHSP-XUTD-UANB-XBBX-FUAQ-IPAP-UBNK-FFZR
7. NetLimiter 3
Registration name: Peter Raheli
Registration code: C99A2-QSSUD-2CSBG-TSRPN-A2BEB
@krisbolton
krisbolton / fix-USB-showing-up-as-two-partitions.md
Last active May 21, 2024 05:04
How to fix a USB drive showing up as two drives (fragmented into multiple partitions) on Windows

How to fix a USB drive showing up as two drives (fragmented into multiple partitions) on Windows:

  1. Hold the Windows key and press X, select PowerShell (Admin), select Yes to the pop-up. You can also use Command Prompt.
  2. In the Powershell interface type diskpart to enter the disk partition tool.
  3. Type list disk to see all disks listed.
  4. Select the USB drive by typing select disk [NUMBER]. Be careful to select the correct drive.
  5. Type clean. An error will occur if you have the drive folder open, close the window and repeat the command if this happens.
  6. Type create partition primary.
  7. Type format fs=ntfs quick to format the drive (you can also choose to set fs=fat32).
  8. Type active.
@major0
major0 / git-rewrite-author.sh
Last active May 21, 2024 05:02
Write Author Name/Email in git's commit history.
#!/bin/sh
# git-rewrite-author.sh
#
# Rewrite git-commit author's Name/EmailAddress.
#
# Based on previous versions of this tool This version runs in POSIX compliant
# shell and .. IMHO .. cleans up a large portion of the filter logic and the
# core syntax such that is is readable and not full of back-slash escape hell.
#
# Other versions:
@JakubOboza
JakubOboza / private-docker-regs-with-free-tiers.markdown
Created May 30, 2019 07:15
Private Docker registry with free tiers for Developers.

List of sites with free tier limits

  • Docker Hub - One private repo/image spot for free
  • Three Scale - Very generous free tier 50GB of space, 500 Pulls a month etc..
  • Canister - 20 private repos with almost no limits on free tier
  • Code Fresh - Free tier for developers

Setup your own private registry

@cryptolok
cryptolok / FirmAD.sh
Created February 28, 2018 00:24
Firmware Automatic Dumping & Extraction Tool
#!/bin/bash
# this tool will automate firmware extraction and unpacking using FT232R-type adaptors (like BusPirate) and a SOIC clip placed on a chip to dump
# install the necessary software:
#$ sudo apt install flashrom binwalk || echo 'git clone?'
# pump up binwalk with additional packages and libraries
#$ bash <(curl -s https://raw.githubusercontent.com/devttys0/binwalk/master/deps.sh)
# place the clip on the chip, connect it to the adaptor, which sould be connected to your PC (with drivers installed) and launch the script:
# chip => clip => adaptor => PC => script
@LittleSaya
LittleSaya / base64ArrayBuffer.ts
Created November 4, 2022 09:45
// Converts an ArrayBuffer directly to base64, without any intermediate 'convert to string then
// use window.btoa' step. According to my tests, this appears to be a faster approach:
// http://jsperf.com/encoding-xhr-image-data/5
/*
MIT LICENSE
Copyright 2011 Jon Leighton
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONIN
@merlox
merlox / sandwich-flashbots-tutorial.js
Created April 29, 2023 21:29
// This is a basic uniswap frontrunning MEV bot
// Made by Merunas follow me on youtube to see how to use it and edit it: https://www.youtube.com/channel/UCJInIwgW1duAEnMHHxDK7XQ
// 1. Setup ethers, required variables, contracts and start function
const { Wallet, ethers } = require('ethers')
const { FlashbotsBundleProvider, FlashbotsBundleResolution } = require('@flashbots/ethers-provider-bundle')
// 1.1 Setup ABIs and Bytecodes
const UniswapAbi = [{"inputs":[{"internalType":"address","name":"_factory","type":"address"},{"internalType":"address","name":"_WETH","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"WETH","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenA","type":"address"},{"internalType":"address","name":"tokenB","type":"address"},{"internalType":"uint256","name":"amountADesired","type":"uint256"},{"internalType":"uint256","name":"amountBDesire
@monsat
monsat / storedState.ts
Created May 14, 2023 14:08
Nuxt useState with VueUse useStorage composables
import { useStorage } from '@vueuse/core'
export const useStoredState = <T>(key: string, initValue: T) => {
const shared = useState<T>(key, () => initValue)
const stored = useStorage<T>(key, initValue)
const state = computed({
get: () => shared.value,
set: (value: T) => {
shared.value = value